1680RL-vacuum-wing-seal

Vacuum Wing Seal

Outer perimeter Wing Seal used to seal outer edge of mold. Normally used at the outer edge of the mold as the atmospheric seal on a LRTM mold. Can be ordered by the foot or for the best value in 100 foot rolls for roll pricing order 1-1680RL.

Part Number: 1680 Category: .
Outer perimeter Wing Seal used to seal outer edge of mold. Normally used at the the outer edge of the mold to create a “lip” seal for the clamping vacuum flange. Excellent performance with a high degree of tear resistance even in the worst of molding environments. The Wing seal begins to engage with the mold flanges about 3/8″ (10mm) apart, then continues to compress to form a vacuum tight seal. The Wing seal is designed to fit into a groove .540″ high x 1″ wide. This groove can easily be created in the upper mold by using Profile 3391 which is laid on top of .040″ (1mm) sheetwax on the flange, the use of the 3391 Profile eliminates the need to create the groove profile from sheetwax. Wing Seal is a EPDM Foam with excellent memory form retention and won’t flatten even with the mold left closed for extended period.
Lengths

100 Ft., 25 Ft., 50 Ft.

Back to Top