INJECTION & VENT PORTS
(click picture to shop for ports)
MOLD MAKING ACCESSORIES
(click picture to shop for accessories)
The RTM process begins with loading dry
fiberglass or similar reinforcement into the mold cavity. Once the mold is
closed, the resin pump pumping both catalyst and resin simultaneously to the mix
head, then mixes the resin and catalyst together as a single component and
injects it into the mold until the mold is completely filled and the resin
appears at the vent ports. The mold is then left closed, for the cure time of
the resin, at which time the mold is open and the finished molded completely
cured part is demolded and is a finished component.
If you do not have Flash or sound,
please click here for the RTM
Process. A window will pop-up explaining the process or click
the button below to get the Flash plug-in.
