The Leading Semi-Automatic Injection System

Begin Your Advancement to the Highest Level of Molding

The Infuser Aviator® is a semi-automatic RTM injection system providing state-of-the-art features and innovation to exceed your daily production demands. The tried-and-tested semi-automatic features of the Infuser Aviator’s will instantly improve your bottom line with less material waste and improved mold quality!

Infuser Aviator® Features

Automatic Injections
Automate your injections with the Infuser Aviator’s auto fill technology. The Infuser Aviator® will precisely fill the mold using a pre-configured injection count, allowing for one-button injections.
Mold Link
Speed up production with pre-configured mold recipes—simply press “start” with the tag on the injection gun’s remote! Mold link is exclusive to the Infuser Series allowing for one-button injections! Place the mold tag on the injection gun’s sensor and the Infuser Aviator knows exactly how to inject the mold.
Real-time Flow Indication
Optimize process repeatability with the Infuser Aviator® real-time flow rate indication. The real-time flow rate indication allows the operator to monitor and control the flow rate throughout the injection process, ensuring a consistent injection each time.
Gel Time Alarm
Eliminate the risk of gelling up the injection gun! Infuser Aviator’s gel time alarm eliminates the risk of resin hardening within the injection gun by alerting the operator post-injection that a flush is required.
Infinite Variable Catalyst Ratio
Infuser Aviator’s infinite variable catalyst ratio (0.5% to 3%) allows for precise control over configuring the catalyst to resin ratios speeding up cure times.
Fully Upgradeable
The modular design of the Infuser PRG® allows for easy integration with future innovations within the Infuser Series. Upgrade your injection system without having to purchase a completely new one!

Infuser Aviator® Models

Standard two component RTM injection system, designed for polyester and vinylester resins. Equipped with a 100cc resin pump and infinitely adjustable 4.5cc stainless steel catalyst pump.

Infuser Aviator® Specifications:

  • 100cc Resin pump
  • 4.5cc Stainless steel catalyst pump
  • 25 ft. Industrial grade hose set
  • 5 gal. Stainless steel solvent tank
  • Stainless steel braided catalyst lines
  • Resin inlet hose with filter—suitable for 55 gallon drums
  • Automatic resin recirculation valves
  • Dual stream mix head with static mixer element
  • Infinite adjustable catalyst ratio
  • Emergency stop
  • Mold Link
  • Remote Mold Link controller
  • Configurable injection pressure
  • Configurable solvent flush
  • Real time flow rate monitoring
  • Elapsed injection time monitoring
  • Full instrumentation control panel
Infuser Aviator EPX Photo Coming Soon

Two component RTM injection system design for epoxy and urethane resins. Equipped with a 100cc resin pump and a 50cc hardener. Along with moisture locking hoses as standard—preventing reaction with environmental sensitive hardeners.

Infuser Aviator® EPX Specifications:

  • 100cc Resin pump
  • 50cc Hardener pump with adjustable ratio
  • 25 ft. Industrial grade hose set
  • 5 gal. Stainless steel solvent tank
  • Resin inlet hose with filter—suitable for 55 gallon drums
  • Automatic resin recirculation valves
  • Dual stream mix head with static mixer element
  • Emergency stop
  • Mold Link
  • Remote Mold Link controller
  • Configurable injection pressure
  • Configurable solvent flush
  • Real time flow rate monitoring
  • Elapsed injection time monitoring
  • Full instrumentation control panel
Infuser Aviator 3C Photo Coming Soon

Three component RTM injection system featuring a 100cc resin, 50cc hardener, and 4.5cc peroxide catalyst pump. The Infuser Aviator 3C is specifically designed to handle hybrid urethane/vinylester materials. Comes standard with moisture locking hoses—preventing reaction with environmental sensitive hardeners.

Infuser Aviator® 3C Specifications:

  • 100cc Resin pump
  • 50cc Hardener pump with adjustable ratio
  • 4.5cc Stainless steel catalyst pump with adjustable ratio
  • 25 ft. Industrial grade hose set
  • 5 gal. Stainless steel solvent tank
  • Stainless steel braided catalyst lines
  • Resin inlet hose with filter—suitable for 55 gallon drums
  • Automatic resin recirculation valves
  • Dual stream mix head with static mixer element
  • Emergency stop
  • Mold Link
  • Remote Mold Link controller
  • Configurable injection pressure
  • Configurable solvent flush
  • Real time flow rate monitoring
  • Elapsed injection time monitoring
  • Full instrumentation control panel

Pricing & Lease Details

Buy Direct
The Infuser Aviator® is available directly from JHM Technologies, Inc. Configured to your exact needs and built in Fenton, MI, USA.
Contact us today for your FREE quote on an Infuser Aviator®.

Lease
Contact us today for details on how you can lease the Infuser Aviator®.

Back to Top