{{ currentQuestion.text }}
- {{ answer.text }}
Your Results
Based on your selections {{ resultsForHumans }} would be an idea choice for your project.
LRTM - Light RTM
The LRTM process is well suited to meet up-to 13 parts per day—daily molding cycles. With LRTM you're able to produce parts with surface finish requirements ranging from smooth to class A on both "A" and "B" sides. Gel coat can be applied to both the "A" and "B" surfaces, though most commonly only applied to the "A" surface if used at all. Fiber loading percentage can be met up-to 40% by weight. Filler load can be met up-to 50% by weight. Cores are supported in all materials—foam, wood, etc. Threaded inserts can be molded into almost any design to reduce post production work.
VARTM - Vacuum Assisted Resin Transfer Molding
The VARTM process is well suited to meet up-to 3 parts per day—daily molding cycles. With VARTM you're able to produce parts with surface finish requirements ranging from smooth to class A on the "A" side. Gel coat can be applied to the "A" surface. Fiber loading percentage is greater than 55% by weight. Filler load can be met up-to 10% by weight. Cores are supported in all materials—foam, wood, etc.
Have a Project?
Need assistance turning your project into a success? Use the request to be contacted button below to start a conversation around your results! No matter which stage your project is in our 30+ years of experience can aid you in making your project a success. Lets talk; we'd love to hear about your project.
Looks like we might need some more information.
The process selection wizard is designed for the majority of industry
applications—covering every application would make the wizard too long.
We're still able to help!
However we'll need some additional information.
Use the request to be contacted
button below to start a conversation around your results.
From there we'll be able to address your project specifically!
